SMI RED Eye-Tracking System
Jump to navigation
Jump to search
General Setup
To test a subject
- Open iViewX on the host computer
- Open Experiment Center on the display computer (or same computer if you're using a one computer setup)
- Select your experiment in Experiment Center, make sure it's locked and connected to the host, and click record
- To stop (if stimuli duration is set to "manual"), click F12 on the display computer
Troubleshooting
If the eye tracker is not working:
- make sure none of the physical connections are loose and the eye tracker (e.g., usb cables) is plugged in
- if the eye tracker doesn't kick into action when you open iViewX, then go to setup>hardware>eye tracking device, and make sure that RED 60/120 (USB) is selected from the drop-down list