Difference between revisions of "SMI RED Eye-Tracking System"
Jump to navigation
Jump to search
| Line 13: | Line 13: | ||
Common problems I've observed: | Common problems I've observed: | ||
*make sure none of the physical connections are loose and the eye tracker (e.g., usb cables) is plugged in | *make sure none of the physical connections are loose and the eye tracker (e.g., usb cables) is plugged in | ||
*if the eye tracker doesn't kick into action when you open iViewX, then go to setup>hardware>eye tracking device, and make sure that ''RED 60/120 (USB)'' is selected from the drop-down list | *if the eye tracker doesn't kick into action when you open iViewX, then go to setup>hardware>eye tracking device, and make sure that '''RED 60/120 (USB)''' is selected from the drop-down list | ||
Revision as of 17:46, 5 June 2015
General Setup
To create an experiment
To test a subject
- Open iViewX on the host computer
- Open Experiment Center on the display computer
- Select your experiment in Experiment Center, make sure it's locked and connected to the host, and click record
- To stop (if stimuli duration is set to "manual"), click F12 on the display computer
Troubleshooting
Common problems I've observed:
- make sure none of the physical connections are loose and the eye tracker (e.g., usb cables) is plugged in
- if the eye tracker doesn't kick into action when you open iViewX, then go to setup>hardware>eye tracking device, and make sure that RED 60/120 (USB) is selected from the drop-down list