Dikablis D-Lab

From REALab Wiki
Jump to navigation Jump to search

AOIs and Gaze Statistics

-dlab software -import dikablis- select a recording and scene in left panel, can analyze recalibrated files-can add area of interest either for whole project or particular subject, can calculate gaze statistics, e.g., how often/long looked at region -click new, define using left and right clicks, select marks, press ok -compute gaze behaviour

Creating New Conditions

In D-Lab, select the "Test procedure" tab near the top-left. Then press the "New Test Procedure" button at the top as shown,

Test p1.png

Setting Within Subject Conditions in D-Lab

It is possible to set within-subject conditions manually, after the each subject's video has been recorded. However it is much easier and less time consuming to remotely set conditions through the D-Lab Control software.

Note that within-subjects conditions are called "Use Cases" in the Dikablis manuals.


Manually Setting Conditions

  • after the fact* creating test procedure, (condition vs. task, subtask, etc.): d-lab manual 22/107

Remotely Setting Conditions in Control Centre

in order to remotely set conditions through Control software, you must first create a common test procedure (?).

d-lab manual: 24/107, 98/107