Dikablis Mobile Eye-Tracking System
Hardware Setup
The Dikablis system in the real room consists of the following hardware:
- Recording computer including power pack (dell laptop)
- Two USB/mini USB cables
- Frame grabber box for the eye camera
- Frame grabber box for the field camera
- Video cable
- Cable box including power pack
- Head unit
Software use is enabled by:
- Recording license stick
- Analysis license stick
- Dikablis installation CD
A schematic of the hardware configuration is shown here: File:Assembly Dikablis.pdf
To start using the Dikablis, make sure the hardware is configured as shown. Start up the laptop, and turn on the cable box (gently lift and slide the toggle). Make sure the recording license stick is plugged in, and open the recording software on the desktop.
Calibrating
- open dikablis recording software - open/create project and subject - adjust camera so that pupil is centered in square - define coordinates using known positions, e.g., corners of the screen, in calibration wizard - define centers of the markers in calibration wizard
control center
- used to stream data to another computer?
Recording
- *on optitrak computer* use matlab script tom/josi optitrak scene_experiment.m - wait for network symbol to indicate 'connected' - press 'start record' -after the expreiemrnt is finished 'stop record'
Marker Detector
-run marker detector to detect markers in the video recorded by the field camera -
Manual Recalibration
-only if you know where subject looked during particular frame
-Dikablis anlayis software -open to subject- choose the frame(s) where you know where the subject was looking, e.g., fixation cross frames -click on start calibration -can manually adjust position x and y to where the subject was known to be looking -click on add, and it will add your adjustment -can continue doing this, using the slider to identify particular frames -when finished, click stop calibration -file, save as postprocessed subject name
AOIs and Gaze Statistics
-dlab software -import dikablis- select a recording and scene in left panel, can analyze recalibrated files-can add area of interest either for whole project or particular subject, can calculate gaze statistics, e.g., how often/long looked at region -click new, define using left and right clicks, select marks, press ok -compute gaze behaviour