Difference between revisions of "SMI RED Eye-Tracking System"

Revision as of 17:35, 5 June 2015

To create an experiment

To test a subject

Open iViewX on the host computer
Open Experiment Center on the display computer
Select your experiment in Experiment Center, make sure it's locked and connected to the host, and click record
To stop (if stimuli duration is set to "manual"), click F12 on the display computer

Common problems I've observed:

make sure none of the physical connections are loose and the eye tracker (e.g., usb cables) is plugged in
if the eye tracker doesn't kick into action when you open iViewX, then go to hardware>make sure that RED 60/120 is selected from the drop-down list

@@ Line 16: / Line 16: @@
 ==Troubleshooting==
 Common problems I've observed:
--make sure none of the physical connections are loose and the eye tracker (e.g., usb cables) is plugged in
+*make sure none of the physical connections are loose and the eye tracker (e.g., usb cables) is plugged in
--if the eye tracker doesn't kick into action when you open iViewX, then go to hardware>make sure that RED 60/120 is selected from the drop-down list
+*if the eye tracker doesn't kick into action when you open iViewX, then go to hardware>make sure that RED 60/120 is selected from the drop-down list