Difference between revisions of "SMI RED Eye-Tracking System"
Jump to navigation
Jump to search
| Line 1: | Line 1: | ||
==General Setup== | ==General Setup== | ||
To test a subject | To test a subject | ||
*Open iViewX on the host computer | *Open iViewX on the host computer | ||
*Open Experiment Center on the display computer | *Open Experiment Center on the display computer (or same computer if you're using a one computer setup) | ||
*Select your experiment in Experiment Center, make sure it's locked and connected to the host, and click record | *Select your experiment in Experiment Center, make sure it's locked and connected to the host, and click record | ||
*To stop (if stimuli duration is set to "manual"), click F12 on the display computer | *To stop (if stimuli duration is set to "manual"), click F12 on the display computer | ||
| Line 11: | Line 8: | ||
==Troubleshooting== | ==Troubleshooting== | ||
If the eye tracker is not working: | |||
*make sure none of the physical connections are loose and the eye tracker (e.g., usb cables) is plugged in | *make sure none of the physical connections are loose and the eye tracker (e.g., usb cables) is plugged in | ||
*if the eye tracker doesn't kick into action when you open iViewX, then go to setup>hardware>eye tracking device, and make sure that '''RED 60/120 (USB)''' is selected from the drop-down list | *if the eye tracker doesn't kick into action when you open iViewX, then go to setup>hardware>eye tracking device, and make sure that '''RED 60/120 (USB)''' is selected from the drop-down list | ||
Revision as of 17:49, 5 June 2015
General Setup
To test a subject
- Open iViewX on the host computer
- Open Experiment Center on the display computer (or same computer if you're using a one computer setup)
- Select your experiment in Experiment Center, make sure it's locked and connected to the host, and click record
- To stop (if stimuli duration is set to "manual"), click F12 on the display computer
Troubleshooting
If the eye tracker is not working:
- make sure none of the physical connections are loose and the eye tracker (e.g., usb cables) is plugged in
- if the eye tracker doesn't kick into action when you open iViewX, then go to setup>hardware>eye tracking device, and make sure that RED 60/120 (USB) is selected from the drop-down list